Emerald-MM-8PLUS 8-Port PC/104-Plus Serial Module discussion topics

Post new topic | forum home

• VxWorks on EMM-8Plus serial module (0) - by Bill Yang, 2011-04-22 12:55:53
• How to add Emerald serial ports to WinCE (0) - by DSC FAE, 2011-02-03 14:34:40
• Exar’s XR17D158 (EMM-8PLUS-XT) QNX-6.4 driver (0) - by Kevin OMalley, 2010-06-09 16:56:19
• base address for registers to serial ports? (2) - by Kevin OMalley, 2010-03-15 19:23:54
• Latching Right-angle Connectors and Conformal (0) - by Kevin OMalley, 2010-03-15 18:41:41
• QNX device driver available (1) - by Kevin OMalley, 2009-10-21 20:56:09
• Exar drivers do not match the device. (0) - by Kevin OMalley, 2009-08-27 16:54:42
• DSC V6.0 driver not finding device (0) - by Kevin OMalley, 2009-08-25 20:53:19
• pin assignment for RS485 Config Incorrect? (0) - by Kevin OMalley, 2009-08-24 14:49:55
• Can the onboard timer generate an interrupt? (0) - by Kevin OMalley, 2009-08-19 14:04:17
• synchronously trigger/read at 30Hz (0) - by Kevin OMalley, 2009-08-19 14:01:07
• RS485 Interrupt Sharing (0) - by Kevin OMalley, 2009-08-19 13:59:24
• Request for different oscillators (0) - by Kevin OMalley, 2009-08-17 19:07:55
• EMM 8P, 8Plus questions (0) - by Kevin OMalley, 2009-08-10 17:06:36

Post new topic | forum home