Diamond Systems Single Board Computer Selection Guide
Key
CPU and System
Data Acquisition
Data Acquisition
General
Processor
Intel Atom Z530P at 1.6GHz
Vortex86DX/SX at 300 or 800MHz
AMD Geode LX800 at 500MHz
AMD Geode LX800 at 500MHz
1.6GHz Intel Atom N270 or 1.66GHz Core Duo LV
VIA Mark CoreFusion at 500 or 800MHz
1.6GHz Intel Atom N270 or 1.66GHz CoreDuo LV
800MHz VIA Mark
Memory
1GB or 2GB DDRAM SO-DIMM
128MB or 256MB DRAM
256MB SDRAM on-board
256MB/512MB/1024MB
Up to 2GB DDR2 SDRAM SO-DIMM
256MB soldered on-board
1GB or 2GB
256MB / 512MB
Front Side Bus
533MHz
500MHz
500MHz
533MHz: N270
667MHz: Core Duo LV
500/800MHz
533MHz or 667MHz (depending on ETX CPU module)
Bus Interface
PC/104 (ISA) and SUMIT-A
PC/104 (ISA)
PC/104-Plus ISA & PCI stackthrough expansion
PC/104 (ISA)
PC/104-Plus (ISA & PCI)
PC/104 (ISA)
PC/104-Plus (ISA & PCI)
PC/104-Plus (ISA & PCI)
Display Support
LVDS LCD and SDVO
VGA CRT and LCD flat panel
CRT and flat panel
CRT and flat panel
LCD flat panel interface (LVDS),
VGA CRT,
TV output,
SDVO interface
CRT and flat panel
CRT, LVDS, TV out
LCD backlight control
CRT and / or 18-bit LVDS flat panel
USB Ports
4 USB 2.0
4 USB 2.0
4 USB 2.0
1 USB 2.0
4 USB 2.0
4 USB 1.1
4 USB 2.0
4 USB 2.0, (4) USB 1.1
Serial Ports
2 RS-232
2 RS-232/422/485
2 RS-232
2 RS-232/422/485
1 RS-232
1 RS-232/422/485
1 RS-232
1 RS-232/422/485
3 RS-232
1 RS-232/422/485
2 RS-232
2 RS-232/485
4 RS-232/422/485
2 RS-232/TTL
2 RS-232
2 RS-232/422/485
Networking
1 Gigabit Ethernet from Intel 82574IT
1 10/100Base-T Ethernet
1 Realtek 8100CL 10/100 base-T Ethernet
1 Realtek 8100CL 10/100 base-T Ethernet
Dual Realtek 8103L 10/100Base-T Ethernet
1 10/100 Ethernet
1 Realtek 8103L 10/100 Ethernet and 1 Gigabit Ethernet
1 10/100 Ethernet
Mass Storage
1 SATA port,
USB flashdisk interface
1 IDE UDMA-100 port,
IDE flashdisk interface
1 IDE UDMA 33
CompactFlash Type II socket
2GB on-board IDE flashdisk
1 IDE UDMA 33, CompactFlash
2 SATA ports,
1 IDE port,
CompactFlash Type II Socket
IDE, flashdisk
2 SATA, 1 IDE (master/slave), CompactFlash, flashdisk
2 IDE UDMA 100, flashdisk, and
CompactFlash interfaces
Kybd/Mouse
PS/2 and USB supported
PS/2
PS/2
PS/2
PS/2
PS/2
PS/2 and USB supported
PS/2
Audio
AC ’97, Line-in/out, Mic,
AC ’97, Line-in/out, Mic,
Amplified speaker interface
AC ’97, Line-in/out, Mic,
AC ’97, Line-in, Line-Out, Mic,
Amplified speaker interface
Analog Inputs
16 single-ended or 8 differential
16 single-ended or 8 differential
32 single-ended or 16 differential or 16 SE + 8 DI; 16-bit resolution
32 single-ended or 16 differential, 16-bit resolution
Max Sample Rate
250KHz
100KHz
250KHz
250KHz
Input Modes
Single ended, differential
Single ended, differential
Single-ended, differential
Single-ended, differential
Input Ranges
±10V, ±5V, ±2.5V, ±1.25V, 0-10V, 0-5V, 0-2.5V programmable
±10V, ±5V, ±2.5V, ±1.25V, 0-10V, 0-5V, 0-2.5V, 0-1.25V
±10V, ±5V, ±2.5V, ±1.25V , 0-10V, 0-5V, 0-2.5V, 0-1.25V
±10V, ±5V, ±2.5V, ±1.25V , 0-10V, 0-5V,
0-2.5V, 0-1.25V
Accuracy
< ±2LSB after autocalibration
< ±2LSB after autocalibration
< ±2LSB after autocalibration
< ±2LSB after autocalibration
On-board FIFO
2048 samples with programmable threshold
2048 samples with programmable threshold
1024 samples with programmable threshold
2048 samples
Analog Outputs
4 12-bit channels
4 12-bit channels
4 12-bit channels
4 12-bit channels
Output Ranges
±5V, ±10V, ±5V, ±10V
±10V, ±5V, 0-10V, 0-5V
±5V, ±10V, 0-5V, 0-10V
±5V, ±10V, 0-5V, 0-10V
Settling Time
10µS max to 0.012%
7mS max to ±1/2 LSB
7µS to ±0.01%
7µS to ±0.01%
Output Current
Logic 0: 12mA max per line
Logic 1: -8mA max per line
±5mA max per channel
±5mA max per channel
±5mA max, 2k½ min load
Digital I/O
8 lines
DV Models: 16 lines
AV Models: 40 lines
24 lines, 3.3V and 5V logic compatible
24 lines, 3.3V/5V compatible; 8 opto-isolated inputs and outputs
40 lines, 5v logic compatible
Direction
Programmable
Programmable
Programmable
Programmable in 8-bit ports
Counter/Timers
24-bit down counter
16-bit down counter
1 24-bit and 1 16-bit A/D sample rate control, counting/timing,
programmable interrupts
1 24-bit and 1 16-bit A/D sample rate control, counting/timing,
programmable interrupts
1 24-bit; 1 16-bit
Clock
10MHz
10MHz
10MHz
Input Voltage
5V ±5%
5V ±5%
+5V ±5% @ 1.0A typical
5VDC ±5%
5V ±5%
+5VDC ±5% @ 2.0A (400MHz), 2.5A (660MHz)
+5VDC ±5% or 7-28VDC
5-28VDC
Operating Temp
-40°C to +80°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-20°C to +71°C or -40°C to +85°C (depending on ETX CPU module)
-40ºC to +85ºC or
-40ºC to +60ºC
-20°C to +71°C or -40°C to +85°C (depending on ETX CPU module)
-40°C to +85°C
Dimensions
3.550" x 3.775"
(90mm x 96mm)
3.550" x 3.775"
(90mm x 96mm)
4.050" x 3.775"
3.775" x 3.550"
(96 x 90mm)
4.5" x 3.7"
(114mm x 95mm)
4.175"W x 4.475"H
4.53" x 6.50" (115mm x 165mm), EPIC standard
8.00" x 5.75"
(203mm x 146mm)
Weight
7.5oz (212g)
2.5oz (71g)
4.5oz (127g)
4.1oz (121g)
11.2oz (318g)
5.3oz (150g)
22oz (624g) maximum
10oz (285g)