Athena II SBC discussion topics

Post new topic | forum home

Previous:  More recent topics

Topics 21 - 40 out of 93

Next:  Older topics

• ADC Fluctuations (4) - by Kevin OMalley, 2010-03-25 16:43:35
• Driver Differences between Athena I & II (2) - by Kevin OMalley, 2010-03-25 15:58:37
• DAQ does not show in Windows Registry (0) - by Kevin OMalley, 2010-03-25 15:46:05
• Mandrake Linux Support? (0) - by Kevin OMalley, 2010-03-24 21:41:30
• Boot from USB (0) - by Kevin OMalley, 2010-03-24 16:37:51
• Latching Right-angle Connectors and Conformal (0) - by Kevin OMalley, 2010-03-15 18:41:41
• How to get Autocalibration to work? (0) - by Kevin OMalley, 2010-03-15 14:40:27
• outputs “Vout 2” “Vout 3” are uncontrollable (0) - by Kevin OMalley, 2010-03-12 16:19:14
• USB ports are UHCI, and NOT OHCI (0) - by Kevin OMalley, 2010-03-12 15:55:46
• Maximum height of heatsinks (0) - by Kevin OMalley, 2010-03-12 15:07:27
• Heatsink is too big (1) - by Kevin OMalley, 2010-03-12 15:02:39
• USB cables the same for Athena I and II? (1) - by Kevin OMalley, 2010-03-08 17:01:41
• IDE conflict in Flash vs. DMA? (0) - by Kevin OMalley, 2010-03-01 16:54:18
• Physical dimensions of Mounting Holes (0) - by Kevin OMalley, 2010-03-01 15:35:01
• No boot without proper heat sink (1) - by Kevin OMalley, 2010-03-01 14:24:42
• Ubuntu Linux Install (0) - by Kevin OMalley, 2010-02-26 17:29:20
• In WindowsXP are the IDE/ATA drivers necessar (0) - by Kevin OMalley, 2010-02-26 16:57:11
• external trigger to start converting analog (1) - by Kevin OMalley, 2010-02-26 16:20:00
• Serial Port won’t receive (2) - by Kevin OMalley, 2010-02-19 18:55:09
• Athena-II Stack through (1) - by U K, 2010-02-11 02:29:12

Post new topic | forum home

Previous:  More recent topics

Topics 21 - 40 out of 93

Next:  Older topics