The DS-MPE-SER4M is a rugged, low cost 4-port high speed PCIe MiniCard module that is ideal for serial I/O expansion in embedded and OEM applications.
It offers four RS-232/422/485 serial ports in the PCIe MiniCard full size form factor with an extended operating temperature of -40°C to +85°C. Data rates on every port are up to 1Mbps in RS-232 mode, and 10Mbps in RS-422 and RS-485 modes. The board's protocols can be set by jumpers or programmatically selected with GPIO lines built into the UART and controlled via software. The serial I/O signals are provided on two miniature connectors with two ports per connector.
Extended temperature capability (-40°C to +85°C) enables the board to operate in environments with extreme temperature swings, such as vehicles or outdoor installations. In addition, the board may be custom-configured with 0-ohm resistors in place of jumper blocks for increased ruggedness in high-vibration environments.
The DS-MPE-SER4M product comes with the PCIe MiniCard hardware assembly, a cable kit with two dual serial cables, and a hardware kit containing jumpers and mounting screws.
|CK-SER4M: Cable kit for DS-MPE-SER4M Quad Serial MiniCard
CK-SER4M includes the following cables:
|Cable 1.25mm to 2x DB9M Serial
|Number of serial ports
|RS-232/422/485 on each port jumper or software configured
|Maximum baud rate
|0.462W @ 3.3V
Linux 2.6.16, 2.6.27, 2.6.31, 2.6.32
|PCIe MiniCard full size
|50.95 x 30mm (2 x 1.18")
|-40ēC to +85ēC
|5% to 95% noncondensing