3.5" Form Factor

PC/104

PC/104-Plus

PCIe/104

PCI/104-Express

COM Express

Single Board Computers

I/O Modules

Power Supplies

Single Board Computers

I/O Modules

Power Supplies

I/O Modules

Single Board Computers

Cables

PC/104

Adapters

PC/104

PC/104-Plus

PCIe MiniCard

PC/104

PCIe MiniCard

PC/104

PC/104-Plus

PCI/104-Express

PCIe MiniCard

PC/104-Plus

PCIe MiniCard

PC/104-Plus

PCIe MiniCard

I/O Modules

Single Board Computers

I/O Modules

PC/104

PC/104-Plus

PC/104

Small form factor

Ethernet Switch Modules

Single Board Computers

Ethernet Switches

Nano and NX Solutions

AGX Xavier Module Solutions

TX2 / TX2i Module Solutions

Whitepapers

Designing Embedded Computers for Rugged Applications

Application Articles

Building Automation
Paper Processing
Train Controller
Wind Instrument
Lung Simulator
Gas Analyzer
Weapon System

Visit our Markets & Applications page.

Sign Up for our eNewsletter Today!





Products   >   Power Supplies   >   Power Supplies   >   Jupiter-MM
      JUPITER-MM  50 Watt PC/104 DC/DC Power Supply for Vehicle Applications   PC104
Jupiter-MM: Power Supplies, Rugged, wide-temperature, PC/104-sized DC/DC power supplies, PC/104
OverviewSpecificationsOrdering
Information
Support

Description

This rugged, extended-temperature DC/DC power supply is designed specifically for air and ground vehicle applications. It consists of a PC/104 form factor module with complete DC-DC voltage regulator circuitry, heat sink, input and output connectors, power-good indicator lamps, and both 8-bit and 16-bit PC/104 bus headers. Input voltage range is 7 to 34VDC, making it suitable for use with both 12V and 24V systems.

Output power is provided directly onto the PC/104 bus connectors, as well as on an auxiliary connector for external tapping. Both dual output (+5, +12) and quad output (+5, +12, -5, -12) versions are available. Up to 10 amps can be provided on the +5 output, or the 50 watts of total power can be distributed across the 4 outputs.


Model

Output Voltage

Output Current

JMM-512

+5V
+12V

10A max
2.0A max

JMM-512-V512

+5V
-5V
+12V
-12V

10A max
150mA max
2.0A max
800mA max


The low-profile SMT design guarantees that you can add other PC/104 modules on top of this board without any worries of mechanical interference. Simply stack your CPU and other cards on top or below the power supply module to provide power to your PC/104 system.

Surface Mount Components

To the maximum extent possible, surface mount components have been used in the design, to lower the profile and improve ruggedness. An additional benefit to SMT technology is the improved ability to use the PCB planes as a heat sink.

High Efficiency, High-Frequency Design

Efficiency is as high as 92 percent, lowering input power requirements as well as heat generation. The 200KHz switching circuit allows the use of smaller inductors, reducing size and weight and allowing the board to fully fit within the PC/104 height requirements.

Advanced Heat Sink Technology

A new compressible thermally-conductive material mounted under the aluminum heat sink makes it possible to wick heat away effectively from varying height components. Also, the use of surface mount components and careful PCB design enhance the dissipation of heat through the PCB planes.

Remote On/Off Control

The supply can be turned on and off with an external contact closure through an auxiliary connector.


Block Diagram

Jupiter-MM: Power Supplies, Rugged, wide-temperature, PC/104-sized DC/DC power supplies, PC/104

Input
Input voltage 7-34VDC
Input ripple <100mV RMS
Transient protection 1500W transient voltage suppressor
Transient cutoff 31V nominal
Output
Output voltage/current JMM-512: +5V at 10A max, +12V at 2.0A max
JMM-512-V512: +5V at 10A max, -5V at 0.15A max, +12V at 2.0A max, -12V at 0.8A max
Output protection Current limit/short circuit protection
Output ripple <50mV RMS (+5V output, 50% load)
Load regulation ±3%
Efficiency 80% to 92%, varies with load and input voltage
Mechanical/Environmental
Size 3.55" x 3.775"
PC/104 bus J1 (64 pins) and J2 (40 pins) stackthrough connectors installed
Operating temperature -40°C to +85°C
Operating humidity 5 to 95% non-condensing
Weight 5.0 oz/142g
MTBF JMM-512: 107,941 hours
JMM-512-V512: 87,569 hours

Get an online quote

 
Jupiter-MM
available models:
JMM-512
Jupiter-MM 50 Watt DC/DC power supply, +5V/+12V, Extended Temperature
Available
JMM-512-V512
Jupiter-MM 50 Watt DC/DC power supply, +5V/+12V/-5V/-12V, Extended Temperature
Available
Please login or signup for an online quote request.

Product Support for Jupiter-MM

User Manual

Jupiter-MM User Manual(.pdf, 200.6 KB)
Datasheet

Jupiter-MM Datasheet(.pdf, 321.3 KB)
FEATURES
50 Watts max output power
+5V @ 10A max
+12V @ 2.0A max
-5V @ 150mA max optional
-12V @ 800mA max optional
Output power provided on PC/104 connectors and screw terminals for increased connection flexibility
Output indicator LEDs
PC/104 form factor
Low profile top heat spreader provides sufficient cooling at full power
-40 to +85C operating temperature
ONLINE SUPPORT
See Jupiter-MM Technical Resources
Request Product information
Request Technical Support
DOWNLOADS
Jupiter-MM User Manual
(.pdf, 200.6 kb)
Jupiter-MM Datasheet
(.pdf, 321.3 kb)