Products Overview


Processor Modules


I/O Expansion Modules


Systems


Enclosures & Accessories


Software


Custom Products

COM-based SBCs


2-in-1 SBCs


Custom Solutions


Ruggedization


Lifecycle Extension

Aerospace/Defense


Energy


Industrial Automation


Instrumentation


Medical


Transportation

Support Overview


Technical Resources


Contact Technical Support


Request an RMA

About Diamond Systems


The Diamond Advantage


Markets & Applications


News


Career Opportunities







3.5" Form Factor
PC/104
PC/104-Plus
PCIe/104
PCI/104-Express
COM Express
Single Board Computers
I/O Modules
Power Supplies
Single Board Computers
I/O Modules
Power Supplies
I/O Modules
Single Board Computers
Cables
PC/104
Adapters
PC/104
PC/104-Plus
PCIe MiniCard
PC/104
PCIe MiniCard
PC/104
PC/104-Plus
PCI/104-Express
PCIe MiniCard
PC/104-Plus
PCIe MiniCard
PC/104-Plus
PCIe MiniCard
I/O Modules
Single Board Computers
I/O Modules
PC/104
PC/104-Plus
PC/104
Small form factor
Ethernet Switch Modules
Single Board Computers
Ethernet Switches
AGX Orin Solutions
ORIN Nano / NX
Nano and NX Solutions
AGX Xavier Module Solutions
TX2 / TX2i Module Solutions
DS-MPE-SER4OPT  4-Port Opto-Isolated Serial PCIe MiniCard Module
 
DS-MPE-SER4OPT: I/O Expansion Modules, Rugged, wide-temperature PC/104, PC/104-<i>Plus</i>, PCIe/104 / OneBank, PCIe Minicard, and FeaturePak modules featuring standard and optoisolated RS-232/422/485 serial interfaces, Ethernet, CAN bus, and digital I/O functions., PCIe MiniCard
DS-MPE-SER4OPT: I/O Expansion Modules, Rugged, wide-temperature PC/104, PC/104-<i>Plus</i>, PCIe/104 / OneBank, PCIe Minicard, and FeaturePak modules featuring standard and optoisolated RS-232/422/485 serial interfaces, Ethernet, CAN bus, and digital I/O functions., PCIe MiniCard
FEATURES
4 opto-isolated RS-232/485 serial ports
Maximum baud rate:
    1Mbps RS-232 mode
    10Mbps RS-485 mode
Available in 3 configurations:
4 RS-232 ports
4 RS-485 ports
2 RS-232 + 2 RS-485 ports
256-byte TX/RX FIFO
SP336 multi-mode transceivers support all modes
+/-500V input/output isolation
Latching connectors for increased ruggedness
+3.3VDC input power
Support for Windows 7, XP, Vista, 2000, and Linux 2.6
Operating temperature -40ºC to +85ºC
PCIe MiniCard full size form factor (50.95 x 30mm)

Description

The DS-MPE-SER4OPT is a rugged, low cost 4-port opto-isolated PCIe MiniCard serial module that is ideal for serial I/O expansion in embedded and OEM applications where opto-isolation is needed for safety or for ground loop prevention.

The DS-MPE-SER4OPT offers 4 RS-232/RS-485 opto-isolated serial ports in a PCIe MiniCard form factor. Each port offers 16C550 compatibility and ultra-deep 256-byte TX/RX FIFOs. Maximum data rates are 1Mbps in RS-232 mode and 10Mbps in RS-485 mode. The board is available preconfigured for 4 RS-232 ports, 4 RS-485 ports, or a combination of 2 RS-232 and 2 RS-485 ports. I/O signals are provided on two miniature latching connectors, with 2 ports per connector.

Each pair of serial ports on the DS-MPE-SER4OPT offers up to 500V isolation from the system ground. Optoisolation increases reliability in applications with long cable runs, where a difference in ground potential can cause significant ground loop currents, damaging non-isolated boards and equipment. Isolation on this miniature board is achieved through a combination of highly integrated isolated power + data components, careful component placement and layout, and a safety-enhancing insulation film on the bottom side, which prevents accidental contact with components on the carrier board.

DS-MPE-OPT4x is designed for rugged environments with latching connectors and extended temperature capability (-40°C to +85°C). In addition, the board may be custom-configured with 0-ohm resistors in place of jumper blocks for increased ruggedness in high-vibration environments.

The DS-MPE-SER4OPT product comes with the 4-port PCIe MiniCard opto-isolated serial module, the CK-SER4M cable kit, and a hardware kit with jumpers and screws.

DS-MPE-SER4OPT: I/O Expansion Modules, Rugged, wide-temperature PC/104, PC/104-<i>Plus</i>, PCIe/104 / OneBank, PCIe Minicard, and FeaturePak modules featuring standard and optoisolated RS-232/422/485 serial interfaces, Ethernet, CAN bus, and digital I/O functions., PCIe MiniCard

Specifications

Number of serial ports 4
Protocols RS-232/485 on each port, configured in pairs
Maximum baud rate RS-232: 1Mbps
RS-485: 10Mbps
Termination RS-485 jumper selectable
UARTs Quad XR17V354 with PCIe interface
FIFO 256-byte TX/RX
Transceiver SP336 multi-mode
Isolation +/-500V input/output
Input power +3.3VDC +/-5%
Power consumption 0.462W @ 3.3V
Software drivers Windows 7, XP, Vista, 2000
Linux 2.6.16, 2.6.27, 2.6.31, 2.6.32
Form Factor PCIe MiniCard full size
Dimensions 50.95 x 30mm (2 x 1.18")
Operating temperature -40ºC to +85ºC
Operating humidity 5% to 95% noncondensing
MTBF tbd
Weight 8.5g (0.3oz)
RoHS Compliant

Models and Accessories

 
DS-MPE-SER4OPT
Available Models:
DS-MPE-OPT4232
4-port RS-232 PCIe MiniCard Opto-Isolated Serial Module
Available
DS-MPE-OPT4485
4-port RS-485 PCIe MiniCard Opto-Isolated Serial Module
Available
DS-MPE-OPT4M22
2-port RS-232, 2-port RS-485 PCIe MiniCard Opto-Isolated Serial Module
Available
Please login or signup for an online quote request.
www.diamondsystems.com | Sunnyvale, California USA | +1-650-810-2500 |
sales@diamondsystems.com