3.5" Form Factor

PC/104

PC/104-Plus

PCIe/104

PCI/104-Express

COM Express

Single Board Computers

I/O Modules

Power Supplies

Single Board Computers

I/O Modules

Power Supplies

I/O Modules

Single Board Computers

Cables

PC/104

Adapters

PC/104

PC/104-Plus

PCIe MiniCard

PC/104

PCIe MiniCard

PC/104

PC/104-Plus

PCI/104-Express

PCIe MiniCard

PC/104-Plus

PCIe MiniCard

PC/104-Plus

PCIe MiniCard

I/O Modules

Single Board Computers

I/O Modules

PC/104

PC/104-Plus

PC/104

Small form factor

Ethernet Switch Modules

Single Board Computers

Ethernet Switches

AGX Orin Solutions

ORIN Nano / NX

Nano and NX Solutions

AGX Xavier Module Solutions

TX2 / TX2i Module Solutions

Whitepapers

Designing Embedded Computers for Rugged Applications

Application Articles

Building Automation
Paper Processing
Train Controller
Wind Instrument
Lung Simulator
Gas Analyzer
Weapon System

Visit our Markets & Applications page.

Sign Up for our eNewsletter Today!





END USER LICENSE AGREEMENT

IMPORTANT NOTICE -- READ THIS BEFORE INSTALLING, DOWNLOADING, COPYING OR USING THE SOFTWARE PROVIDED TO YOU BY DIAMOND SYSTEMS CORPORATION THROUGH ANY MEDIUM OR DELIVERY MECHANISM.

BY CLICKING ON "I AGREE", OR OTHERWISE INDICATING YOUR AGREEMENT TO DIAMOND SYSTEMS, YOU AGREE THAT SUCH ACTION CONSTITUTES A "SIGNATURE" THAT IS A LEGALLY BINDING EQUIVALENT TO A HANDWRITTEN SIGNATURE INDICATING YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE.

DOWNLOADING, INSTALLING, COPYING OR USING THE SOFTWARE ACCOMPANYING THIS LICENSE INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS. READ ALL OF THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT PRIOR TO DOWNLOADING, INSTALLING, COPYING OR USING THE SOFTWARE. IF YOU DO NOT ACCEPT THESE TERMS, DO NOT DOWNLOAD, INSTALL, COPY OR USE THE SOFTWARE, AND IF YOU HAVE DOWNLOADED IT OR RECEIVED A COPY ON ANY PHYSICAL MEDIA, YOU MUST IMMEDIATELY DELETE THE SOFTWARE FROM YOUR HARDWARE AND IMMEDIATELY RETURN THE SOFTWARE TO DIAMOND SYSTEMS CORPORATION.

PLEASE NOTE THAT YOU MAY NOT USE, COPY, MODIFY OR TRANSFER THE PROGRAM OR DOCUMENTATION OR ANY COPY, EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT. REDISTRIBUTION NOT PERMITTED.

1. License. This software program provided in any medium or delivery mechanism (the "Program") and any accompanying read-me and help files (the "Documentation") are licensed, not sold, to you by Diamond Systems Corporation, a California corporation (“Licensor”). The term "Program" shall also include any updates of the Program provided to you by Licensor at any time subsequent to the time of your acceptance of these terms. Subject to the terms of this agreement, you have a non-exclusive right to use the Program and Documentation only on products designated by Licensor and only on such products located in the United States and its territories or any other country to which this Program is legally exported. This Program is "in use" on a computer when it is loaded into the temporary memory (i.e. RAM) or installed into the permanent memory (e.g. hard drive, CD-ROM or other storage device) of that computer. You agree to use your best efforts to prevent and protect the contents of the Program and Documentation from unauthorized disclosure or use. Licensor and its licensors reserve all rights not expressly granted to you. Licensor’s licensors are the intended third party beneficiaries of this agreement and have the express right to rely upon and directly enforce the terms set forth herein.

2. Limitation on Use. You may not reverse assemble, reverse engineer, decompile or otherwise attempt to create the source code from the Program, or otherwise seek or utilize any expression of the Software in other than object code form. You may not remove the copyright notice from the Program. You may not release the results of any performance or functional evaluation of any Program to any third party without prior written approval of Licensor for each such release. Licensor reserves the right to conduct or have conducted audits to verify your compliance with this agreement.

3. 4. Copyright. The Program and related Documentation are copyrighted by Licensor and its licensors.

5. Ownership. You agree that the Program and Documentation and all copies thereof belong to Licensor and its licensors. You agree that you neither own nor hereby acquire any claim or right of ownership to the Program and Documentation or to any related patents, copyrights, trademarks or other intellectual property. Licensor and its licensors retain all right, title and interest in and to the Documentation and all copies and the Program at all times, regardless of the form or media in or on which the original or other copies may subsequently exist. This license is not a sale of the original or any subsequent copy. All content accessed through the Program is the property of the applicable content owner and may be protected by applicable copyright law. This license gives you no rights to such content

6. Term and Termination. [This license is effective until terminated by Licensor.] This license automatically terminates if you fail to comply with the terms and conditions of this license. You agree that, upon such termination, you will either destroy (or permanently erase) all copies of the Program and Documentation, or return the original Program and Documentation to Licensor, together with any other material you have received from Licensor in connection with the Program, as designated by Licensor.

7. DISCLAIMER OF WARRANTY. To the maximum extent permitted by applicable law, LICENSOR AND ITS LICENSORS PROVIDE THE PROGRAM AND THE DOCUMENTATION “AS IS” WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, lack of viruses, accuracy or completeness of responses, results, and lack of negligence or lack of workmanlike effort, all with regard to the Software and the provision of or failure to provide Support Services. ALSO, THERE IS NO WARRANTY OR CONDITION OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, CORRESPONDENCE TO DESCRIPTION OR NON-INFRINGEMENT, WITH REGARD TO the Program and the Documentation. All risk of quality and performance of the Program and the Documentation is with YOU. Should the Program prove defective, you and not Licensor assume the entire cost of any service and repair. This disclaimer of warranty constitutes an essential part of this agreement.

8. LIMITATION OF REMEDIES AND LIABILITY. To the maximum extent permitted by applicable law, IN NO EVENT WILL LICENSOR OR ITS LICENSORS BE LIABLE FOR ANY INDIRECT DAMAGES OR OTHER RELIEF ARISING OUT OF YOUR USE OR INABILITY TO USE THE PROGRAM INCLUDING, BY WAY OF ILLUSTRATION AND NOT LIMITATION, LOST PROFITS, LOST BUSINESS OR LOST OPPORTUNITY, BUSINESS INTERRUPTION, LOSS OF CONFIDENTIAL OR OTHER INFORMATION, LOSS OF PRIVACY, OR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING LEGAL FEES, ARISING OUT OF SUCH USE OR INABILITY TO USE THE PROGRAM, EVEN IF LICENSOR, ITS LICENSORS OR AN AUTHORIZED LICENSOR DEALER, DISTRIBUTOR OR SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. WITHOUT LIMITING THE FOREGOING LIMITATION OF LIABILITY, IN THE EVENT LICENSOR IS FOUND LIABLE FOR DAMAGES TO YOU IN A COMPETENT LEGAL PROCEEDING LICENSOR'S AGGREGATE LIABILITY FOR ALL CLAIMS ARISING OUT OF OR RELATED TO THESE LICENSE TERMS IS LIMITED TO ONE THOUSAND U.S. DOLLARS ($1,000).

9. Applicable Law. This license will be governed by the laws of the State of California, without reference to conflicts of laws principles. The United Nations Convention on Contracts for the Sale of Goods does not apply to this license.

10. Export Controls. The Program and the underlying information and technology may not be downloaded or otherwise exported (i) to any country to which the U.S. has embargoed goods; (ii) to anyone on the U.S. Treasury Department’s list of Specially Designated Nationals or the U.S. Commerce Department’s Table of Deny Orders; or (iii) to anyone you know or have reason to know will utilize the Program in the development or production of nuclear, chemical, or biological weapons. By downloading or using the Program, you are agreeing to the foregoing and you represent and warrant that you are not located in, under the control of, or a national or resident of any such country or on any such list.

11. U.S. Government End Users. The Program is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (Oct. 1995), consisting of “commercial computer software” and “commercial computer software documentation,” as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users acquire only those rights in the Program and the Documentation that are provided by this agreement.

12. Severability. If any provision of this agreement shall be held by a court of competent jurisdiction to be contrary to law, the remaining provisions of this agreement shall remain in full force and effect.

13. No Other Agreements. This license constitutes the entire agreement between the parties with respect to the Program and the Documentation, and supersedes any other written or oral agreement. If there is any conflict between the terms and conditions of this license and any other agreement between the parties, the terms and conditions of the other agreement shall control, but only upon mutual agreement by the parties hereto and except for the provisions of this license regarding the rights of Licensor’s licensors.

You must agree to the terms of this license agreement in order to download and use Universal Driver 7.0. When you click to agree, you will be emailed a link to download the Universal Driver software.

Name*
Organization*
Email*
Comment 1
Comment 2
* Required