| L2 Switching Features |
|
|
| Auto MAC address learning/ageing |
✓ |
✓ |
| MAC addresses static |
✓ |
✓ |
| Virtual LAN |
✓ |
✓ |
| Bidirectional VLAN translation |
|
✓ |
| Unidirectional VLAN translation (ingress/egress) |
|
✓ |
| Private VLAN static |
✓ |
✓ |
| Port isolation static |
✓ |
✓ |
| MAC-based VLAN |
|
✓ |
| Protocol-based VLAN |
|
✓ |
| IP subnet-based VLAN |
|
✓ |
| VLAN trunking |
✓ |
✓ |
| iPVLAN Trunking |
|
✓ |
| GARP VLAN registration GVRP |
|
✓ |
| Multiple registration protocol MRP |
|
✓ |
| Multiple VLAN registration protocol MVRP |
|
✓ |
| IEEE 802.1ad provider bridge (native or translated VLAN) |
✓ |
✓ |
| Multiple spanning tree protocol MSTP |
|
✓ |
| Rapid spanning tree RSTP, STP |
✓ |
✓ |
| Loop guard |
✓ |
✓ |
| Link aggregation static |
✓ |
✓ |
| Link aggregation LACP |
✓ |
✓ |
| AGGR/LACP user interface alignment with Industry standard |
✓ |
✓ |
| UNI LAG (LACP) 1:1 Active/Standby |
✓ |
✓ |
| LACP Revertive/Non-revertive |
✓ |
✓ |
| LACP loop free operation |
✓ |
✓ |
| BPDU guard and restricted role |
|
✓ |
| Error disable recovery |
|
✓ |
| IGMPv2 snooping |
✓ |
✓ |
| IGMPv3 snooping |
|
✓ |
| MLDv1 snooping |
|
✓ |
| MLDv2 snooping |
|
✓ |
| IGMP filtering profile |
|
✓ |
| IPMC throttling, filtering, and leave proxy |
|
✓ |
| MVR |
|
✓ |
| MVR profile |
|
✓ |
| Voice VLAN |
|
✓ |
| DHCP snooping |
|
✓ |
| ARP inspection |
|
✓ |
| Port mirroring |
✓ |
✓ |
| Flow mirroring |
|
✓ |
| Rmirror |
|
✓ |
| L3 and Routing Features |
|
|
| DHCP option 82 relay |
|
✓ |
| UPNP |
|
✓ |
| Software-based IPv4 L3 static routing with Linux kernel integration |
✓ |
✓ |
| Hardware-based IPv4 L3 static routing with Linux kernel integration |
✓ |
✓ |
| RFC 2328 OSPFv2 dynamic routing |
|
✓ |
| Software-based IPv6 L3 static routing |
|
✓ |
| Hardware-based IPv6 L3 static routing |
|
✓ |
| RFC-1812 L3 checking (version, IHL, checksum, and so on) |
✓ |
✓ |
| Quality of Service (QoS) Features |
|
|
| Traffic classes (8 active priorities) |
✓ |
✓ |
| Port default priority |
✓ |
✓ |
| User priority |
✓ |
✓ |
| Input priority mapping |
|
✓ |
| QoS control list (QCL Mode) |
✓ |
✓ |
| Global storm control for UC, MC, and BC |
|
✓ |
| Random early discard (RED) |
|
✓ |
| Port policers |
|
✓ |
| Queue policers |
|
✓ |
| Global/VCAP (ACL) policers |
✓ |
✓ |
| Port egress shaper |
✓ |
✓ |
| Queue egress shapers |
✓ |
✓ |
| DiffServ (RFC2474) remarking |
|
✓ |
| Tag remarking |
|
✓ |
| Scheduler mode |
✓ |
✓ |
| Protection Features |
|
|
| 1:1 port protection—G.8031 |
|
✓ |
| G.8032 ring protection |
|
✓ |
| G.8032 ring protection version 2 |
|
✓ |
| Security Features |
|
|
| Port-based 802.1X |
✓ |
✓ |
| Single 802.1X |
|
✓ |
| Multiple 802.1X |
|
✓ |
| MAC-based authentication |
✓ |
✓ |
| VLAN assignment |
|
✓ |
| QoS assignment |
|
✓ |
| Guest VLAN |
|
✓ |
| RADIUS authentication and authorization |
✓ |
✓ |
| RADIUS accounting |
|
✓ |
| MAC address limit |
✓ |
✓ |
| IP MAC binding |
|
✓ |
| IP/MAC binding dynamic to static |
|
✓ |
| TACACS+ authentication and authorization |
|
✓ |
| TACACS+ command authorization |
|
✓ |
| TACACS+ accounting |
|
✓ |
| Web and CLI authentication |
✓ |
✓ |
| Authorization (15 user levels) |
|
✓ |
| ACLs for filtering/policing/port copy |
✓ |
✓ |
| IP source guard |
|
✓ |
| Synchronization Features |
|
|
| SyncE with SSM |
|
✓ |
| SyncE nomination for 2 interfaces |
|
✓ |
| Vitesse one-step TC PHY solution |
|
✓ |
| 1588v2 PTP with two step clock |
|
✓ |
| 1588v2 PTP with one step clock |
|
✓ |
| Peer-to-peer transparent clock |
|
✓ |
| End-to-end transparent clock |
|
✓ |
| Boundary Clock |
|
✓ |
| Redundant masters and multiple timing domains |
|
✓ |
| ITU filtering: ZLS30380 servo network synchronization algorithm |
|
✓ |
| PTP over IPv4 |
|
✓ |
| Unicast/multicast |
|
✓ |
| TC internal master/slave with PDV filtering |
|
✓ |
| TC internal master/slave with reduced PDV filtering |
|
✓ |
| G.781 compliant clock selection algorithm for the platform as a PTP slave |
|
✓ |
| Combined SyncE and 1588 |
|
✓ |
| MSCC timing BU servo algorithm integration (MSCC ZLS30387) |
|
✓ |
| MSCC timing BU DPLL API integration |
|
✓ |
| Serval-TE intermediate servo |
|
✓ |
| G.8265.1 BMCA |
|
✓ |
| G.8265 compliant filter: requires ZLS30380 network synchronization algorithm |
|
✓ |
| PTP profile |
|
✓ |
| Clock quality |
|
✓ |
| G.8275.1 BMCA |
|
✓ |
| G.8275 compliant filter: ZLS30380 |
|
✓ |
| PTP time interface |
|
✓ |
| NTPv4 client |
|
✓ |
| OAM and Test Features |
|
|
| 802.3ah: Variable, request, response |
|
✓ |
| 802.3ah: Discovery process, information. Event notification, loopback |
|
✓ |
| 802.3ah: Dying gasp |
|
✓ |
| 802.3ah: Dying gasp SNMP Trap |
|
✓ |
| Flow OAM: Ingress/Egress |
|
✓ |
| FM: Continuity check and remote defect indication (ETH-CC + ETH-RDI) |
|
✓ |
| FM: Loopback (ETH-LB ) |
|
✓ |
| FM: Link trace (ETH-LT) |
|
✓ |
| FM: CFM dynamic TLV |
|
✓ |
| FM: Alarm indication signal (ETH-AIS) |
|
✓ |
| FM: Locked signal (ETH-LCK) |
|
✓ |
| FM: Test signal (ETH-Test) |
|
✓ |
| FM: Automatic protection switching (ETH-APS + ETH-RAPS) |
|
✓ |
| PM: Dual-ended frame loss measurement - CCM-based (ETH-LM) |
|
✓ |
| PM: Single-ended frame loss measurement - LMM/LMRbased (ETH-LM) |
|
✓ |
| PM: Frame delay and delay variation measurement (ETHDM) |
|
✓ |
| EPS/ERPS using ETH-CCM |
|
✓ |
| OAM inject engine support |
|
✓ |
| OAM inject engine support 2 |
|
✓ |
| Nested MEPs |
|
✓ |
| Link state tracking |
|
✓ |
| FM: Link trace PDU (LTM) respond |
|
✓ |
| FM: Loop back PDU (LBM) respond |
|
✓ |
| Vitesse OAM Y.1731 PHY solution |
|
✓ |
| Syslog for congestion fault management |
|
✓ |
| OAM HW engine |
|
✓ |
| Robustness Features |
|
|
| Cold start |
✓ |
✓ |
| Cool start |
✓ |
✓ |
| Power Saving Features |
|
|
| ActiPHY |
✓ |
✓ |
| PerfectReach |
✓ |
✓ |
| EEE power management |
✓ |
✓ |
| LED power management |
✓ |
✓ |
| Thermal protection |
✓ |
✓ |
| Adaptive fan control |
✓ |
✓ |
| Customization Framework Features |
|
|
| Separate BSP and application |
✓ |
✓ |
| Allow customers to append or change a binary image |
✓ |
✓ |
| IPC JSON-RPC socket (with notification support) |
✓ |
✓ |
| Overwrite default startup configuration |
✓ |
✓ |
| Boot and initialization of third-party daemons |
✓ |
✓ |
| Configuration to disable certain build-in features |
✓ |
✓ |
| Microsemi Ethernet board API (MEBA) |
✓ |
✓ |
| SNMP MIB OID |
✓ |
✓ |
| Management Features |
|
|
| JSON-RPC |
✓ |
✓ |
| JSON-RPC notifications |
|
✓ |
| Dual CPU (Aapplication variant with JSON) |
|
✓ |
| RFC 2131 DHCP client |
✓ |
✓ |
| RFC 2131 DHCP server |
|
✓ |
| RFC 3315 DHCPv6 client |
|
✓ |
| RFC 1035 DNS client, relay |
|
✓ |
| IPv4/IPv6 ping |
✓ |
✓ |
| IPv4/IPv6 traceroute |
✓ |
✓ |
| HTTP server |
✓ |
✓ |
| CLI - Console port |
✓ |
✓ |
| CLI - Telnet |
|
✓ |
| Industrial standard CLI |
✓ |
✓ |
| Industrial standard configuration |
✓ |
✓ |
| Industrial standard CLI debug commands |
✓ |
✓ |
| Port description CLI |
✓ |
✓ |
| Management access filtering |
✓ |
✓ |
| HTTPS |
✓ |
✓ |
| SSHv2 |
|
✓ |
| IPv6 management |
|
✓ |
| IPv6 ready logo PHASE2 |
|
✓ |
| RFC4884 (ICMPv6) |
|
✓ |
| System Syslog |
✓ |
✓ |
| Software upload through web |
✓ |
✓ |
| SNMPv1 / v2c / v3 Agent1 |
✓ |
✓ |
| RMON (Group 1, 2, 3, and 9) |
|
✓ |
| RMON alarm and event (CLI, web) |
|
✓ |
| Alarm module |
|
✓ |
| IEEE 802.1AB-2005 link layer discovery LLDP |
✓ |
✓ |
| TIA 1057 LLDP-MED |
|
✓ |
| Industry standard discovery protocol - ISDP |
|
✓ |
| sFlow |
|
✓ |
| Configuration download/upload - industrial standard |
✓ |
✓ |
| Loop detection restore to default |
✓ |
✓ |
| Symbolic register access |
✓ |
✓ |
| Daylight saving |
|
✓ |
| SD/MMC card slot support |
✓ |
✓ |
| Standard MIBs Features |
|
|
| RFC 2674 VLAN MIB |
|
✓ |
| IEEE 802.1Q bridge MIB 2008 |
|
✓ |
| RFC 2819 RMON (Group 1, 2. 3, and 9) |
|
✓ |
| RFC 1213MIB II |
✓ |
✓ |
| RFC 1215 TRAPS MIB |
✓ |
✓ |
| RFC 4188 bridge MIB |
✓ |
✓ |
| RFC 4292 IP forwarding table MIB |
|
✓ |
| RFC 4293 management information base for the internet protocol (IP) |
|
✓ |
| RFC 1850 OSPF Version 2 MIB |
|
✓ |
| RFC 5519 multicast group membership discovery MIB |
|
✓ |
| RFC 4668 RADIUS authentication client MIB |
|
✓ |
| RFC 4670 RADIUS accounting MIB |
|
✓ |
| RFC 3635 Ethernet-like MIB |
✓ |
✓ |
| RFC 2863 interface group MIB using SMI v2 |
|
✓ |
| RFC 3636 802.3 MAU MIB |
|
✓ |
| RFC 4133 entity MIB version 3 |
|
✓ |
| RFC 4878 link OAM MIB |
|
✓ |
| RFC 3411 SNMP management frameworks |
✓ |
✓ |
| RFC 3414 Uuser-based security model for SNMPv3 |
|
✓ |
| RFC 3415 view-based access control model for SNMP |
|
✓ |
| RFC 2613 SMON - PortCopy |
|
✓ |
| IEEE 802.1 MSTP MIB |
✓ |
✓ |
| IEEE 802.1AB LLDP-MIB (LLDP MIB included in a clause of the STD) |
✓ |
✓ |
| IEEE 802.3ad (LACP MIB included in a clause of the STD) |
|
✓ |
| IEEE 802.1X (PAE MIB included in a clause of the STD) |
|
✓ |
| TIA 1057 LLDP-MED ( MIB is part of the STD) |
|
✓ |
| RFC 3621 LLDP-MED Power (POE) (No specific MIB for POE+ exists) |
✓ |
✓ |
| Private MIB framework |
|
✓ |
| Board Support Package (BSP) and API Features |
|
|
| Internal CPU |
✓ |
✓ |
| API and application split |
✓ |
✓ |
| MESA layer |
✓ |
✓ |
| MEBA layer |
✓ |
✓ |
| 32 MB NOR FLASH only option |
✓ |
✓ |
| Port Control Features |
|
|
| Port speed/duplex mode/flow control |
✓ |
✓ |
| Aquantia 2.5G PHY Gen2 |
✓ |
✓ |
| Aquantia 2.5G PHY Gen3 |
✓ |
✓ |
| Aquantia 10G PHY Gen2 |
✓ |
✓ |
| 802.1Qbb per priority flow control |
✓ |
✓ |
| Port frame size (jumbo frames) |
✓ |
✓ |
| Port state (administrative status) |
✓ |
✓ |
| Port status (link monitoring) |
✓ |
✓ |
| Port statistics (MIB counters) |
✓ |
✓ |
| Port VeriPHY (cable diagnostics) |
✓ |
✓ |
| PoE/PoE+—PD69208 support |
✓ |
✓ |
| PoE/PoE+ with LLDP |
✓ |
✓ |
| NPI port |
✓ |
✓ |
| PCIe |
✓ |
✓ |
| On-the-fly SFP detection |
✓ |
✓ |
| DDMI |
|
✓ |
| UDLD |
|
✓ |
